首页 | 期刊简介 | 主要栏目 | 投稿指南 | 编委会 | 广告合作及广告客户 | 期刊订阅 | 书籍推荐 | 联系我们
带多孔管的复杂消声器的流场分析
投稿时间:2016-11-16  修订日期:2016-12-27  点此下载全文
引用本文:彭卓凯.带多孔管的复杂消声器的流场分析[J].计算机辅助工程,2017,26(2):32-36.
作者单位E-mail
彭卓凯 大长江集团 豪爵研发中心 pengzhuokai@126.com 
基金项目:
中文摘要:为优化摩托车消声器的设计,利用CFD技术分析多种带多孔管消声器的流场速度、湍动能和压力分布,并计算这些方案的压力损失.结果表明:压力损失随着小孔面积比增大而快速下降,小孔面积比在2.5以上时较合适;多孔管堵头开孔对减小压力损失无明显影响;最大的压力损失位于插入管Ⅰ部位,而非多孔管处,故插入管Ⅰ的直径应大于其他3根管的直径.
中文关键词:摩托车  消声器  多孔管堵头  流场  压力损失  k-ε方程
 
Flow field analysis on complex muffler with perforated pipe
Abstract:To optimize the motorcycle muffler design, the velocity, turbulence kinetic energy and pressure distribution of flow field of various kinds of mufflers with perforated pipes are analyzed using CFD technology, and their pressure losses are calculated. The results show that, the pressure loss decreases quickly with the increase of the area ratio of small holes, and it is appropriate that the area ratio of small holes is 2.5 above; the hole in perforated pipe plug has no obvious effect on reducing pressure loss; the biggest pressure loss part is not located in the perforated pipe region, but in the region of insert pipe Ⅰ, and so the insert pipe Ⅰ diameter should be greater than that of the other three pipes.
keywords:motorcycle  muffler  perforated pipe plug  flow field  pressure loss  k-ε equation
查看全文  查看/发表评论  下载PDF阅读器

您是第9486100位访问者
地址:上海市浦东新区海港大道1550号上海海事大学图书馆B511 邮编:201306
联系电话:021-38284908 传真:021-38284916 E-mail:smucae@163.com
微信号:CAEChina   QQ:274226135   QQ群(中国CAE技术交流):204762677
本系统由北京勤云科技发展有限公司设计
沪ICP备11028865号-2